This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article contains content that is written like an advertisement. Please help improve it by removing promotional content and inappropriate external links, and by adding encyclopedic content written from a neutral point of view. (February 2016) (Learn how and when to remove this message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "LEMO" – news · newspapers · books · scholar · JSTOR (December 2019) (Learn how and when to remove this message) The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.Find sources: "LEMO" – news · newspapers · books · scholar · JSTOR (December 2019) (Learn how and when to remove this message) (Learn how and when to remove this message)
A selection from the LEMO electronic and fiber optic range of connectors

LEMO is an electronic and fiber optic connector manufacturer, based in Écublens, Switzerland. It is known for producing the push-pull connectors. LEMO connectors are used in medical, industrial, audio/visual, telecommunications, military, scientific research and measurement applications. The company, founded in 1946, started as a manufacturer of contacts in noble and rare metals. The company took its name from the company founder, engineer Léon Mouttet.

LEMO has set several connector standards. The 3K.93C connector[1] has been adopted by the American (SMPTE 304M), Japanese (ARIB BTAS-1005B) and European (EBU R100-1999) standards organisations for HDTV fiber links for the broadcast market.

LEMO office in North America
LEMO 00 coaxial connectors on RG316 cable, below a BNC to LEMO adapter, a male-to-male adapter barrel and a 50 Ω terminator (topmost).

While LEMO connectors were generally developed as proprietary designs, the legal status of many of the older designs is not clear. For example, the LEMO website itself shows a standardisation date of 1970 for the LEMO 00 model. The "chocolate plate" design of the connector's shell grip is, however, trademarked.[2]

LEMO's REDEL connectors are used in medical and aviation environments. Most Cirrus aircraft use REDEL 6-pin connectors.[3][4]

In July 2014, LEMO acquired Northwire Inc., a US specialty cable manufacturer of wire and multi-conductor cable and retractiles for the medical, aerospace and defense, energy, and industrial markets. The acquisition of Northwire allows LEMO to provide a complete cable-connector solution.

LEMO holds two addresses in Japan (Tokyo and Osaka), another one in Singapore, and two in the USA. LEMO also holds offices in Vienna and Budapest.

In 1994, LEMO entered into Chinese market through a distributor. In 2004 LEMO set up a subsidiary company in Shanghai. Besides Shanghai, LEMO China has offices in more than 14 cities, they are as follows: Beijing, Guangzhou, Shenzhen, Tianjin, Changsha, Chengdu, Wuhan, Taiyuan, Harbin, Changchun, Shenyang, Xi'an, Nanjing and Zhengzhou.

In Écublens, one of 3 offices in Switzerland, R&D is performed in a test laboratory with a climatic chamber.

References

  1. ^ LEMO 3K.93C Catalogue[permanent dead link]
  2. ^ USPTO registered trademark number 2703464, see LEMO FAQ: Are LEMO connector design trademark registered?
  3. ^ "Cirrus SR20 (and a bit about the SR22)". philip.greenspun.com. Retrieved 5 March 2023.
  4. ^ Ranly, Doug. "Headset Plugs". www.sportys.com. Retrieved 5 March 2023.

External links

RF connectors (coaxial)
Category